LEXUS V8 Engines LLC
XLEXUS V8 Engines LLC

Online forms

Client Forms

Choose the form that matches the work you need. After submission, the form is emailed to Lexus V8 Engines LLC and to the customer email address, and a printable summary is created for the shipping box.

ECU Service Client Form

For customers only sending their ECU in for alterations. Immobilizer off or set up to their requirements.

New Harness Build Client Form

Available for selected manual-transmission 2UZ-FE and 3UZ-FE applications, subject to ECU and project review. Customer supplies the ECU unless otherwise quoted.

Rebuilt Harness and ECU Client Form

MANUAL OR AUTOMATIC: For customers sending their ECU and OEM harness for rebuild/reconfigure.

Online client form

ECU Service Client Form

ECU services for engine-swap projects - not standard-vehicle modification

Close

Submission verification

Overview & Shipping

For customers only sending their ECU in for alterations. Immobilizer off or set up to their requirements.

Shipping Address
Lexus V8 Engines LLC
8124 Alfred Blvd
Punta Gorda, Florida, USA 33982

Important shipping requirement: Do not use USPS because USPS does not deliver to this address. Ship with FedEx or UPS only.

Pack components securely with padding on all sides. Place this completed form or the printed summary inside the box so the parts can be matched to the job. Email your tracking number once shipped.

Required Components / Information

  • OEM ECU / ECM to be programmed or inspected
  • Printed copy of this completed form inside the box
  • Clear notes about the engine, donor vehicle, recipient swap vehicle, and requested engine-swap programming
  • Any previous ECU read/file information if the ECU has already been modified

What You'll Receive

  • ECU inspection/read and service confirmation where applicable
  • Programming of selected supported services
  • Invoice before return shipment
  • Return tracking once the ECU ships back
Pricing Guide and Terms
Immobilizer Delete$150

Removes the immobilizer requirement where supported by the supplied ECU.

Throttle Response TuneQuoted after ECU/calibration review

Scope and pricing depend on the supplied ECU and requested calibration changes.

ECU Flashing$150

Flat price includes supported, lawful application changes selected in this form, including transmission setup, brake-switch correlation, speed or rev limiter changes, and other calibration work confirmed after ECU review.

Unsupported / damaged / recovery workQuoted after inspection

Bench-read, recovery, replacement, repair, or unsupported ECU work requires approval before continuing.

Return ShippingBased on location

Final return shipping is confirmed on the invoice before payment.

Pricing is a guide based on normal supported applications. Missing components, damaged parts, unsupported ECUs, custom wiring, additional connector replacement, repair, recovery, or special integration may change final pricing.

  • Workmanship is covered for the specific service performed unless otherwise stated in writing.
  • Customer-supplied used electronics, sensors, pedals, connectors, and harnesses cannot be guaranteed against internal failure, prior damage, water intrusion, impact damage, unsupported variants, or previous modifications.
  • Warranty is void if the ECU or harness is opened, cut, modified, tampered with, installed incorrectly, powered incorrectly, or used outside the intended application after service.
  • Lexus V8 Engines LLC may request photos, videos, scan-tool data, voltage tests, ECU reads, or return inspection before determining the next step on any reported issue.
  • The customer is responsible for final vehicle-side wiring, fusing, grounds, mounting, routing, and safe installation unless otherwise quoted in writing.
  • Direct Deposit / Zelle has no fee. PayPal / card payment has a 3.5% processing fee. Payment is due upon invoice receipt before return shipment.
Complete your build details in order

Donor = the vehicle the engine came from. Recipient = the vehicle you are building it into. Leave unknown optional details blank and explain them in Requested work.

  1. Client details
  2. Donor engine and setup
  3. Recipient vehicle
  4. Requested work
  5. Confirmation
1. Client details

Who we should contact and where your completed parts would be returned.

2. Donor engine and setup

Tell us about the original engine, matching ECU and the gearbox you will use. This is not the recipient vehicle.

3. Recipient vehicle

The vehicle receiving the engine, plus the transfer case that will be used if applicable.

4. Requested work

Choose the work you want reviewed and describe the finished result. Final scope and pricing are confirmed by the workshop.

Build photos (optional)

Clear photos help us confirm the ECU and understand the installation. These are shared privately with the workshop. JPG, PNG or WebP; up to 6 photos, 6 MB each and 18 MB combined. Please avoid including unrelated personal information.

5. Confirmation

Check the details above before signing and submitting the form.

Agreement

By signing below, I confirm the ECU service selections and acknowledge the pricing, warranty limits, and terms in this form.

A copy is emailed to Lexus V8 Engines LLC and to the customer email entered above. A printable box summary appears below after submit so the customer can include it with the shipped parts.

Online client form

New Harness Build Client Form

Premium new standalone harness order - customer supplies ECU

Close

Submission verification

Overview & Shipping

Available for selected manual-transmission 2UZ-FE and 3UZ-FE applications, subject to ECU and project review. Customer supplies the ECU unless otherwise quoted.

Shipping Address
Lexus V8 Engines LLC
8124 Alfred Blvd
Punta Gorda, Florida, USA 33982

Important shipping requirement: Do not use USPS because USPS does not deliver to this address. Ship with FedEx or UPS only.

Pack components securely with padding on all sides. Place this completed form or the printed summary inside the box so the parts can be matched to the job. Email your tracking number once shipped.

Required Components / Information

  • Customer-supplied ECU / ECM unless Lexus V8 Engines is supplying one
  • Accelerator pedal and pedal plug where drive-by-wire is used
  • MAF sensor and plug if not already confirmed
  • Clear engine bay, ECU location, transmission, and recipient vehicle photos
  • Printed copy of this completed form inside the shipment if components are shipped

What You'll Receive

  • Premium new standalone harness built for the selected application
  • Client plug wiring references for vehicle-side connections
  • ECU programming included as specified for the build where supported
  • Immobilizer removal included where required and supported
  • Bench/start-stand test video where applicable before invoice/shipment
Pricing Guide and Terms
New Standalone Harness - Manual Application$1,600

Includes premium new harness build, manual configuration, ECU flashing/programming, and immobilizer removal for customer-supplied ECU where supported.

Pre-programmed ECU Supplied by Lexus V8+$120

Optional ECU supply where available and applicable.

Return ShippingBased on location

Final return shipping is confirmed on the invoice before payment.

Pricing is a guide based on normal supported applications. Missing components, damaged parts, unsupported ECUs, custom wiring, additional connector replacement, repair, recovery, or special integration may change final pricing.

  • Workmanship is covered for the specific service performed unless otherwise stated in writing.
  • Customer-supplied used electronics, sensors, pedals, connectors, and harnesses cannot be guaranteed against internal failure, prior damage, water intrusion, impact damage, unsupported variants, or previous modifications.
  • Warranty is void if the ECU or harness is opened, cut, modified, tampered with, installed incorrectly, powered incorrectly, or used outside the intended application after service.
  • Lexus V8 Engines LLC may request photos, videos, scan-tool data, voltage tests, ECU reads, or return inspection before determining the next step on any reported issue.
  • The customer is responsible for final vehicle-side wiring, fusing, grounds, mounting, routing, and safe installation unless otherwise quoted in writing.
  • Direct Deposit / Zelle has no fee. PayPal / card payment has a 3.5% processing fee. Payment is due upon invoice receipt before return shipment.
Complete your build details in order

Donor = the vehicle the engine came from. Recipient = the vehicle you are building it into. Leave unknown optional details blank and explain them in Requested work.

  1. Client details
  2. Donor engine and setup
  3. Recipient vehicle
  4. Requested work
  5. Harness layout and branch colour
  6. Additional contact notes
  7. Confirmation
1. Client details

Who we should contact and where your completed parts would be returned.

2. Donor engine and setup

Tell us about the original engine, matching ECU and the gearbox you will use. This is not the recipient vehicle.

3. Recipient vehicle

The vehicle receiving the engine.

4. Requested work

Choose the work you want reviewed and describe the finished result. Final scope and pricing are confirmed by the workshop.

5. Harness layout and branch colour

Choose your loom finish and describe mounting, routing and installation requirements.

6. Additional contact notes

Optional information to help us respond.

Build photos (optional)

Clear photos help us confirm the ECU and understand the installation. These are shared privately with the workshop. JPG, PNG or WebP; up to 6 photos, 6 MB each and 18 MB combined. Please avoid including unrelated personal information.

7. Confirmation

Check the details above before signing and submitting the form.

Agreement

By signing below, I confirm the new harness build requirements and acknowledge that final vehicle-side wiring, mounting, routing, fusing, and grounds remain the installer/customer responsibility unless quoted otherwise.

A copy is emailed to Lexus V8 Engines LLC and to the customer email entered above. A printable box summary appears below after submit so the customer can include it with the shipped parts.

Online client form

Rebuilt Harness and ECU Client Form

OEM harness rebuild, standalone reconfigure, and ECU service

Close

Submission verification

Overview & Shipping

MANUAL OR AUTOMATIC: For customers sending their ECU and OEM harness for rebuild/reconfigure.

Shipping Address
Lexus V8 Engines LLC
8124 Alfred Blvd
Punta Gorda, Florida, USA 33982

Important shipping requirement: Do not use USPS because USPS does not deliver to this address. Ship with FedEx or UPS only.

Pack components securely with padding on all sides. Place this completed form or the printed summary inside the box so the parts can be matched to the job. Email your tracking number once shipped.

Required Components / Information

  • Main engine harness
  • Starter / knock-sensor sub-harness where separate
  • ECU / ECM for programming or immobilizer removal
  • Transfer-case actuator control unit and pigtail if transfer-case integration is required
  • Accelerator pedal and pedal plug where drive-by-wire is used
  • Any rear harness pigtail, speed sensor, reverse-light, or pass-through wiring required

What You'll Receive

  • OEM harness rebuild/refresh and standalone reconfiguration where applicable
  • Connector/terminal/seal replacement as required and quoted
  • ECU programming / immobilizer work selected and supported
  • Bench/start-stand test video where applicable before invoice/shipment
  • Client plug wiring references for vehicle-side connections
Pricing Guide and Terms
Standalone OEM Harness Rebuild$750

Base rebuilt standalone harness conversion. Includes immobilizer removal if required and supported by the ECU.

ECU Flashing Service$150

Required for supported calibration or application changes beyond base immobilizer/manual setup.

Throttle Response TuneQuoted after ECU/calibration review

Scope and pricing depend on the supplied ECU and requested calibration changes.

Transmission Wiring$100

Additional automatic-transmission wiring where required.

Transfer Case Wiring$90

Additional transfer-case interface wiring where required.

Engine Connector Replacement$5 - $10 each

Connector replacement where damaged, brittle, broken, oil-soaked, heat-damaged, or unsuitable for long-term use.

ECU Connector Replacement$12 - $40 each

Varies depending on ECU connector type and application.

Return ShippingBased on location

Final return shipping is confirmed on the invoice before payment.

Pricing is a guide based on normal supported applications. Missing components, damaged parts, unsupported ECUs, custom wiring, additional connector replacement, repair, recovery, or special integration may change final pricing.

  • Workmanship is covered for the specific service performed unless otherwise stated in writing.
  • Customer-supplied used electronics, sensors, pedals, connectors, and harnesses cannot be guaranteed against internal failure, prior damage, water intrusion, impact damage, unsupported variants, or previous modifications.
  • Warranty is void if the ECU or harness is opened, cut, modified, tampered with, installed incorrectly, powered incorrectly, or used outside the intended application after service.
  • Lexus V8 Engines LLC may request photos, videos, scan-tool data, voltage tests, ECU reads, or return inspection before determining the next step on any reported issue.
  • The customer is responsible for final vehicle-side wiring, fusing, grounds, mounting, routing, and safe installation unless otherwise quoted in writing.
  • Direct Deposit / Zelle has no fee. PayPal / card payment has a 3.5% processing fee. Payment is due upon invoice receipt before return shipment.
Complete your build details in order

Donor = the vehicle the engine came from. Recipient = the vehicle you are building it into. Leave unknown optional details blank and explain them in Requested work.

  1. Client details
  2. Donor engine and setup
  3. Recipient vehicle
  4. Requested work
  5. Harness layout and branch colour
  6. Components being supplied
  7. Additional contact notes
  8. Confirmation
1. Client details

Who we should contact and where your completed parts would be returned.

2. Donor engine and setup

Tell us about the original engine, matching ECU and the gearbox you will use. This is not the recipient vehicle.

3. Recipient vehicle

The vehicle receiving the engine, plus the transfer case that will be used if applicable.

4. Requested work

Choose the work you want reviewed and describe the finished result. Final scope and pricing are confirmed by the workshop.

5. Harness layout and branch colour

Choose your loom finish and describe mounting, routing and installation requirements.

6. Components being supplied

Select only the items you will send us. Describe any additional components in your project notes.

7. Additional contact notes

Optional information to help us respond.

Build photos (optional)

Clear photos help us confirm the ECU and understand the installation. These are shared privately with the workshop. JPG, PNG or WebP; up to 6 photos, 6 MB each and 18 MB combined. Please avoid including unrelated personal information.

8. Confirmation

Check the details above before signing and submitting the form.

Agreement

By signing below, I confirm the rebuilt harness and ECU service selections and acknowledge that connector condition, missing components, and unsupported ECU variants may affect final pricing.

A copy is emailed to Lexus V8 Engines LLC and to the customer email entered above. A printable box summary appears below after submit so the customer can include it with the shipped parts.

Custom application and compliance review

Our services are built for purpose-designed dune buggies, rock crawlers, off-highway safari vehicles, closed-course race cars, boats and custom bikes. They are not offered for vehicles registered, licensed or intended for street or highway use.

This application restriction does not authorize emissions tampering. We do not offer or support calibrations that disable emissions-control or OBD functions on EPA-certified vehicles or engines. Every project is reviewed for its original certification, finished-machine classification, intended use and applicable federal, state and local requirements before acceptance.

Tell us about the complete application so the workshop can confirm whether it is eligible before parts are shipped.