Skip to main content

Workshop records

Harness work and test recordings

Three documented jobs showing the donor equipment, the installation requirement, the work carried out and the checks recorded for the supplied package.

Each summary links to the original walkthrough, the relevant service and a useful technical guide. Match any wiring reference to your exact donor equipment and installation.

Harness branches routed along the 3UZ-FE test engine, with renewed connectors and woven protective sleeving.
Harness-routing detail from our 1986 Hilux 3UZ-FE walkthrough. The full recording shows the connections and workshop checks.

1986 Hilux · 3UZ-FE manual

Recipient
1986 Toyota Hilux YN67 4WD, right-hand drive
Donor system
2005 Toyota Crown UZS186 3UZ-FE
Drivetrain
R150F manual gearbox and VF1A transfer case

What the installation needed

Prepare the engine-management package for the Hilux layout, with the ECU behind the glovebox or stereo and the harness routed through the passenger-side firewall.

Work documented

The walkthrough identifies the harness branches, electronic-throttle pedal, airflow meter, engine grounds, oxygen-sensor connections and vehicle interfaces. It covers the starter and transmission connections, vehicle-speed signal, OBD-II socket, and the dedicated fuse-and-relay arrangement. The project notes describe manual-application ECU preparation.

What the check showed

The recording shows diagnostic checks and an engine-run test of the supplied package on the workshop stand. Vehicle installation and commissioning follow once the package is fitted in the Hilux.

Read the Hilux job notes and watch the recording

Back to workshop examples

1994 Land Cruiser · 2UZ-FE automatic

Recipient
1994 Toyota Land Cruiser
Engine system
Toyota 2UZ-FE V8
Drivetrain
Automatic transmission and four-wheel-drive integration

What the installation needed

Adapt a supplied two-wheel-drive engine harness for the automatic and four-wheel-drive installation, including the required transfer-case and vehicle interfaces.

Work documented

The rebuild renews injector connectors and coil-connector terminals and seals. The recording identifies transmission sensors, the neutral-safety switch, selector and transfer-case connections, and separate ECU and instrument-cluster speed signals. It also covers loom routing, the airflow-meter branch, power distribution and the labelled vehicle interface.

What the check showed

The recorded engine test includes a stored coil-related code, its discussion and clearing, and a final scanner screen reporting no fault codes at that check. This sequence documents the wiring package’s condition during the workshop test.

Read the Land Cruiser job notes and watch the recording

Back to workshop examples

2003 IS300 · 1UZ-FE VVT-i manual

Recipient
2003 Lexus IS300
Donor system
GS400 1UZ-FE VVT-i engine management
Drivetrain
Manual-transmission conversion

What the installation needed

Prepare the GS400 engine-management system and harness for the IS300 manual conversion, with the ECU and vehicle interfaces treated as part of the complete setup.

Work documented

The published walkthrough documents original-harness conversion, ECU preparation and the vehicle interfaces supplied with this package. The donor’s wiring and throttle equipment are reviewed together for the manual installation.

What the check showed

The public record documents test-stand verification of the supplied engine-management package. Follow the recording to see the connections and checks for this IS300 conversion.

Read the IS300 job record and watch the recording

Back to workshop examples

Using these examples for your project

Send your donor details, ECU-label and harness photographs, gearbox and recipient vehicle information. We confirm the applicable wiring and ECU work before parts are shipped. The Pricing Guide can carry your selected setup into the client form; the final scope is confirmed for the actual equipment.

After installation, vehicle power and grounds, fuel supply, cooling, mechanical condition and operating checks still need to be verified. The Technical Library provides general checks and the matching client-plug references.

Customer build logs

For installation progress, questions and discussion shared by builders, visit Swap Chat. Community posts describe the author’s own build and are separate from these workshop records.